UMR Engines highly trained workshop technicians can supply & install these fuel injected Holley Terminator kits to your existing
carburettor V8. These EFI kits are of the highest quality. There is other efi kits out there like the Fast EZ-EFI 2.0, but we believe
the customer support & service that Holley offers is unbeatable. Holley Terminator EFI fuel injection kits are suitable from 250 HP
(Horsepower) to 600 HP (Horsepower) which will be suitable for most applications.
There are other fuel injected kits for your V8 that will handle more horsepower, but Holley Horsepower range is more than
suitable for most vehicles. Be one of the very few people with an old Ford Cleveland or Windsor, Chev or Holden 253,308 that is
fuel injected. Get rid of that carby and bolt on a Holley Terminator EFI kit and make your friends envy.
Are you tired of flat spots and would love the reliability and performance that a fuel injection kit can offer ?
Call UMR Engines Slacks Creek Brisbane today to have your Holley kit professionally installed by our highly trained technicians.
Price on install can vary depending on Vehicle and Fuel tank. Average labour installation price is $1650.00 which includes a 4 gas
analyser and a dyno run. UMR Engines recommends a vehicle tune up to ensure your fuel injection kit will run like clockwork.
Holley Terminator Main Wiring
Harness
PART No # 558-414
Replacement main wiring harness for
the Holley Terminator EFI kits 550-
405 and 550-406
Price Including GST $
Holley Terminator V8 EFI spare parts and fuel kits available to buy from a Brisbane company
Holley Terminator EFI 4bbl Throttle Body Fuel
Injection System - Hard Core Gray
EFI 4bbl Throttle Body Fuel Injection System V8
4 bbl 950 cfm Range 250 To 600 HP
Fits all standard square flange intake manifolds.
Includes: Throttle Body Injection (TBI) unit,
ECU, hand-held programmer, wiring and all
sensors. Does NOT include: fuel pump, fuel
lines, regulator or filters - Sold separately
Holley Fuel injection V8 INSTALLATION fitting at Slacks Creek - Brisbane
Holley EFI Fuel System Kit
PART No # 526-3 •In-line Fuel Pump (12-920) •Billet Fuel Regulator •Billet Filters •Earl's Super Stock™ hose •Super Stock™ push-on fittings Price including GST $
Holley Terminator EFI Fuel Injection V8 Kit replaces your old
carburettor Available at Brisbane
Terminator Throttle Body
Harness
PART No # 558-415
Replacement throttle body wiring
harness for Terminator EFI kits 550-405
and 550-406
Price Including GST $
Terminator 80PPH injector
(single)
PART No # 522-801
Replacement 80PPH injector for
Terminator EFI
Price Including GST $
Holley Terminator Air Temp
Sensor
PART No # 554-121
Replacement Air Temperature Sensor
for Terminator EFI
Price Including GST $
Holley Terminator 1 bar MAP
sensor
PART No # 554-120
Replacement 1 bar MAP sensor for
Terminator EFI
Price Including GST $
Terminator Throttle Bracket
PART No # 20-151
Terminator Throttle Bracket
Price Including GST $
Holley Terminator Throttle kick
down bracket
PART No # 20-150
Terminator Throttle cable / Trans cable
kickdown bracket
Price Including GST $
•
Queensland Transport Authorised to approve LA1,LA3,LB1,LD1-2,LK1,LK6 Modification’s to light vehicles
•
LPG Approved Workshop
•
RWC Licence
•
RACQ Approved Automotive Repairer
UMR Engines highly trained workshop technicians can
supply & install these fuel injected Holley Terminator kits to
your existing carburettor V8. These EFI kits are of the
highest quality. There is other efi kits out there like the
Fast EZ-EFI 2.0, but we believe the customer support &
service that Holley offers is unbeatable. Holley Terminator
EFI fuel injection kits are suitable from 250 HP
(Horsepower) to 600 HP (Horsepower) which will be
suitable for most applications.
There are other fuel injected kits for your V8 that will
handle more horsepower, but Holley Horsepower range is
more than suitable for most vehicles. Be one of the very
few people with an old Ford Cleveland or Windsor, Chev
or Holden 253,308 that is fuel injected. Get rid of that
carby and bolt on a Holley Terminator EFI kit and make
your friends envy.
Are you tired of flat spots and would love the reliability and
performance that a fuel injection kit can offer ?
Call UMR Engines Slacks Creek Brisbane today to have
your Holley kit professionally installed by our highly trained
technicians.
Price on install can vary depending on Vehicle and Fuel
tank. Average labour installation price is $1650.00 which
includes a 4 gas analyser and a dyno run. UMR Engines
recommends a vehicle tune up to ensure your fuel
injection kit will run like clockwork.
Holley Fuel injection V8 INSTALLATION
fitting at Slacks Creek - Brisbane
7 Moss Street, Slacks Creek, Qld 4127
Holley Terminator EFI Fuel Injection V8
Kit replaces your old carburettor
Available at Brisbane
